Sunday, July 18, 2010

PAINTING WALL TIPS AND TRICKS

When a room in your house already feels unattractive, dull, or 'old', or if there is damage to the wall such as peeling or appear functions, to improve and provide a new easy look of the wall, the easiest way is to re-paint with another color. Repainted the house can add to the beauty of space and improve the quality of life for living space in more beautiful place, cleaner and attractive.

The problem that often occurs in wall paints, among others, moldy walls (damp), liming, the emergence of stripe on the wall, fine cracks, peeling, bulging, or fade. To overcome the various problems on wall paint, we need to stage and determines the correct way to paint. Paint used must be in accordance with their use, such as exterior paint used for exterior walls because they are more resistant to changes in weather, temperature and air temperature drastically. Easy paint fade is usually caused by paint quality and usage, such as interior paint for exterior use.

Paint that has good resistance to salt (alkali resistant) contained in the mixture of filler materials so that wall color of wall paint is not quickly dull and mottled. To strengthen the exterior paint to make it more durable, priming is required for resistance to salt or alkali to be durable to prevent damaging of the wall paint. Exterior wall paint usually has a chemical content which makes it weatherproof, and called weatherproof, weathershield, and so forth. Although we will use exterior paint, it would be better if given a primer paint first.

The stages in painting a wall

1. Prepare before painting tools like brushes, water cans. Stir paint down for five minutes.

2. Do not forget to cover other things in the room, first move the things or cover with newspaper. Clean the walls first with Vacuum cleaner when there is, or with a feather duster or a broom. If too dirty can be brushed with liquid detergent. Clean the surface with water.

3. Coat again and align with the wall sections that need to be patched, such as hair cracks, nail holes and other.

4. new wall surfaces can be coated with water base or solvent quality for a good end result that is flat, smooth and not easy peeling. Wall sealer can also be used to adjust ph of the cement with paint so the colors will last long.

5. Paint with white color as the bottom, wait for about 1-2 hours to drain. Mix the paint with water colors as much as 10 percent of the amount of paint, mix well for 5 minutes.

5. Painted with a mean trick is to make a zig-zag motion from top to bottom closed wall repeatedly until blended. After 2-3 hours back with a new layer of paint to make it more smooth results. Roller can be used to flatten the surface of the wall color.

6. For the ceiling could use a roller, paint mixture was made slightly thicker.

7. If you want to change other colors the walls should sand until smooth. Clean with a cleaning tool, then painted with colors are preferred. In order not look different wall color, the way he is working on one area of wall surface on the spot at a time so that all surfaces are relatively the same color. Time distance between the layers with the second one about 1-2 hours and not for too long.

Similarly, I hope these tips help

No comments:

Post a Comment