Tuesday, July 13, 2010

Fixing a Cracked Bathtub

FIXING A CRACKED BATHTUB:

To fix a cracked bath, wherever possible, approach the job from the underside or back. We know of several products on the market that are capable of doing the job, but be aware that they may not work on all baths, especially some plastic ones. Due to the cost of replacing the entire bath, it is well worth looking into repair products before you take the plunge and invest in a new bath.



A chipped or cracked fiberglass or porcelain bathtub is an eyesore as well as a potential hazard. A leaking bathtub can cause structural damage to underlying floors and walls. Prevent damage to floors and walls by repairing a chipped or cracked fiberglass or porcelain bathtub as soon as the problem is discovered. Repairing the damaged tub in a timely manner will not only prevent structural damage, it will also stop the crack from spreading and becoming a much larger problem.

You can either hire a professional to repair a damaged bathtub, or you can easily fix it yourself using a kit. A do-it-yourself kit costs a fraction of what a professional would charge, and they are readily available at most home improvement stores. The kits usually contain epoxy resin, wet/dry sandpaper, fine-grit sandpaper, gel coat enamel, and an applicator. To complete the repair you will also need a hairdryer, rags, a paintbrush, and a tungsten carbide cutter appropriately sized for the repair at hand.

The surface of the damaged area must also be smooth and clean. Widen the crack and remove any rough spots using a tungsten carbide cutter. Hold the tool at the appropriate angle to create a v-shaped channel. Do this down the entire length of the crack. If you are repairing a chip, grind off the edges to make them smooth. Sand off any remaining rough edges using fine-grit sandpaper. Smoothness is the key to attaining an invisible repair. Begin repairing your fiberglass bathtub by making sure the damaged area is clean and dry. Using a hairdryer over the area will ensure that it‘s completely dry and ready to be repaired. This is a crucial step in the repair of your bathtub since epoxy will not stick to a wet surface.

The next step is to apply the epoxy filler. Follow the label directions on the product, and use the included applicator to fill in the groove. Fill it in completely, and remove any extra epoxy using the applicator tool. Allow the area to dry for approximately 12 hours. Doing so will ensure that the epoxy has had adequate time to cure. After the epoxy has cured, sand it with the wet/dry sandpaper that came with the kit. Complete this step by wetting the fine-grit sandpaper and sanding the repair to a smooth finish.

Now the repair is ready for an application of gel coat enamel. Follow the instructions included with the kit, and apply a smooth layer of enamel. Some kits come with various colors that can be mixed to match your bathtub. If the enamel matches the color of your bathtub, the repair should be virtually unnoticeable.

Epoxy resin is strong, and the repair should last as long as the bathtub. Make sure your bathtub has proper support underneath to prevent future cracks from forming. Avoid placing heavy objects near your bathtub; the dropping of heavy objects is often how bathtubs become chipped. Heavy bottles or other objects fall into the tub causing unsightly and often serious damage.

Porcelain bathtub repair kits are very similar to fiberglass repair kits, and they are used much in the same manner. Enamel paint is used to cover the repair, and it becomes invisible.

If you can’t match the color of the repair to the color of the bathtub, you might want to consider repainting it. Enamel bathtub paint is strong and long-lasting. Your newly repaired bathtub will look like it did when it was brand new.

Others Frequently Asked Questions about fixing a cracked bathtub :
(quoted from yahoo!answer)

How do I fix a crack in my fiberglass bathtub?
* Use the Fiber Glass body repair kit from any Lowe's, Home Depot, Ace or any real auto store will carry it. It will come with a fiberglass pad that you will place over the crack. Apply the resin that comes with it, Sand it and apply any enamel/epoxy paint that will closely match the color of your tub.
Bondo works fine, but under the regular stress a tub endures, the product will eventually crack/split. Thus sending you right back to square one.


How do i fix a small crack in a fiberglass tub?

In addition to a standard fiberglass fiber/resin type repair kit,
Bondo is supposed to make a fiberglass filled filler compound as well as a some sorta bath tub/shower repair kit. Don't have any details - having probs w/their website. Be sure to drill all ends of the crack(s) before repairs
to stop the crack(s) from traveling/growing...

How to fix cracks on the surface of Fiberglass bathtubs?
If the cracks are actually deep scratches in the enamel on the tub, you can try some auto rubbing compound. It won't perfect the damage, but it will minimize the effect.
However, if these are truly cracks which are into the fiberglass, the problem is one you cannot fix yourself. A good company for this is Surface Doctor. They do a great job.
Another source is to call your local plumbing supply house (or the closest one) and have them refer their repairman to you. Those in stock units often get damaged during transit & every supply house has at least one guy they call to do field repairs.
The cost is usually around $100.

1 comment:

  1. We are really grateful for your blog post. You will find a lot of approaches after visiting your post. Great work
    tub refinishing chicago

    ReplyDelete